Carbon Filter Systems
FWT15 Carbon Filters
Carbon Filter Systems
FWT15 Carbon Filters
- Save on detergents and chemicals
- Improved efficiency for reduced energy and water consumption
- Extends the life of process equipment and heat exchange systems
- Reduced maintenance costs
- Flow rates up to 27 gpm at 15 psi and up to 192,000 grains per tank
- 1.25" internal porting for higher service flow rates with less pressure drop
- Single, twin parallel, twin alternating, demand recall, salt-recycling and brine reclaim systems available
- No raw water bypass
- Separate source regeneration
- Daily peak flow rate display
- Alternate fill
- 12-volt operation (ac or dc) uses less than $2/year of electricity and a 12 volt relay driver
- Fully programmable timed cycles
- Smart controller monitors usage patterns and optimizes performance
- Corrosion resistant control valve body and tanks for a longer life
- All internal components are lead free
- Designed for simplicity and durability with no nuts, bolts or screws
Activated carbon does an excellent job in reducing/removing tastes, odors and dissolved organic
chemicals from water supplies including chlorine. Additional grades of carbon are available for specific contaminant applications. Activated carbon requires periodic backwashing of the filter bed.
| Model Number | Pipe Size | Media Quantity | SQ.FT. Bed Area | Media Tank Dia X HT(tank only) | Dechlor Ro Feed | Commercial (Taste& Odor) | Organics | BackWash Flow Rate | Total Height(W/base & Valve) |
|
FWT15-CH-14-3 |
1.5 | 3 | 1.07 | 14x65 | 5 | 9 | 3 | 10 | 74 |
| FWT15-CH-16-4 | 1.5 | 4 | 1.4 |
14x65 |
7 | 12 | 4 | 15 | 74 |
| FWT15-CH-18-5 | 1.5 | 5 | 1.77 | 18x65 | 8 | 15 | 5 | 18 | 76 |
| FWT15-CH-21-6 | 1.5 | 6 | 2.41 | 21x62 | 12 | 18 | 6 | 25 | 72 |
| FWT15-CH-21-7 | 1.5 | 7 | 2.41 | 21x62 | 12 | 18 | 6 | 25 | 72 |
| FWT15-CH-24-8 | 1.5 | 8 | 3.14 | 24x72 | 15 | 24 | 8 | 30 | 82 |
| FWT15-CH-21-6 | 1.5 | 10 | 3.14 | 24x72 | 15 | 5 | 10 | 30 | 82 |
| FWT15-CH-21-7 | 1.5 | 15 | 4.91 | 30x72 | 24 | 7 | 15 | 28 | 87 |
Dimensions are typical, but subject to change without notice
Allow additional 12” for media loading
Available in top-mount or side-mount
• Service and backwash flow rates are based on 50ºF incoming water temperature.
• Operating parameters - pressure range 40-100 PSI; temperature range 40º-110ºF.
• Product improvement designs are subject to change without notice.
